|Building type >|
Ratings for floor finishes are available for each of the following building sectors:
Offices, Domestic (multi-residential), Healthcare, Education (Schools & Further Education), Retail, Courts
Functional unit for floor finishes for Offices and Domestic (multi-residential)
1m² of floor finish or covering as fitted to a level surface, with underlay, backing, adhesive and/or grout, etc. as appropriate. To include regular cleaning and maintenance, and any repair, refurbishment or replacement over the 60 year study period based on typical practice in these sectors.
Functional unit for floor finishes for retail with frequent fitout
1m² of floor finish or covering as fitted to a level surface, with underlay, backing, adhesive and/or grout, etc. as appropriate. To include regular cleaning and maintenance, and any repair, refurbishment or replacement over the 60 year study period based on aesthetics.
Functional unit for floor finishes for healthcare, education, retail (infrequent fitout) and courts
1m² of floor finish or covering as fitted to a level surface, with underlay, backing, adhesive and/or grout, etc. as appropriate. To include regular cleaning and maintenance, and any repair, refurbishment or replacement over the 60 year study period based on durability.
The structural floor deck beneath the floor finish is assessed separately in "Upper floors" or "Ground floors" and is not included here. Raised access flooring has not been included within the Green Guide Online.
Each building type in this section contains flooring specifications commonly used for the modelled floor area for that building type. The data have been analysed across the entire range of flooring products suitable, so it is possible to compare all of the Environmental Profiles for the floor finishes assessed for each building type. For example, in the ratings provided for Education, the results for the polyamide (nylon) loop tufted 500g/m² bitumen backed carpet tile can be compared directly with the results for the plain and decorative linoleum.
The ratings for a particular floor finish can vary between building types as a result of factors such as:
- The mass needed to meet the wear category requirements.
- The service life (which varies between building types depending on the criteria for replacement).
- The maintenance regime.
- The variety of specifications commonly used and therefore the range assessed for each building type.
The explanatory diagram below describes the approach to be taken for each building sector which is eligible within BREEAM for floor finish credits. Please note that floor finishes are not eligible for credits in either EcoHomes or the Code for Sustainable Homes.
The diagram sets out the main type of floor area which has been assessed for each building type. Because we appreciate that each building normally contains several different floor areas with different wear requirements. The diagram also directs users to the appropriate ratings which should be used for other floor areas, e.g. offices or corridors. The descriptions of soft floorings set out in 'BS EN 685:2007 Resilient, textile and laminate floor coverings - Classification' have been used to describe all resilient and carpet floor finish specifications, classified in terms of their FCSS category chosen to represent the main floor area within each building type, using the guidance in BS EN 685 and other published documentation, such as the DfES (now DCSF) guide "Floor Finishes in Schools".
The choice of floor finish is generally determined by the intended use of the building and the practical requirements of an individual space. Designers and specifiers first establish the wear performance required, whether the materials needs to be waterproof or easily cleaned or whether particular visual, acoustic or comfort-related qualities are priorities. Having made this decision, the final choice of specification is made from within three basic flooring groups, "Hard floor finishes", "Resilient floor finishes" and "Carpeting". To reflect this process and to make the task of the specifier more straightforward, floor finishes and coverings have been grouped for each building type into the following product groups:
Many floor finishes are normally fitted or laid with underlays, backings, adhesives and/or grouts to provide good wear and an even surface; and these have been taken into account where appropriate, assuming a level floor finish beneath. Both domestic and non-domestic maintenance schedules have been included for all flooring, and include activities such as mopping, vacuuming, and polishing as appropriate.
Many retail premises will undergo frequent fitout to change the "look" of a store, but other retailers will replace floor finishes purely on the basis of durability. To ascertain whether a retail scheme should be assessed on the basis of replacement by durability or fashion, typical practice historically, or in other branches of the retailer should be considered, and if the floor finish replacement cycle is 10 years or less, the "replacement by fashion" ratings should be used.
The Green Guide Online does not cover the potential health and comfort issues associated with indoor air quality, which are separately covered by the HEA 9 credit in BREEAM schemes.
BREEAM Schemes to which this element applies:
View this as a full page (PDF file)
For more information
Call us on 0333 321 88 11 if you would like to know more, or email email@example.com.